diy theft protection, interupt BTSI circuit?

[Rameroo]

Hello, Has anyone installed a switch in the BTSI connector to stop the truck from being put into gear? This would allow a remote start but not allow vehicle being put into gear. Stellantis has a tech bulletin but states that it will not work on the trans in a ram 1500 3.6l. For anti theft purposes should the fob code be stolen and truck started, they would not be able to put it into gear. Thoughts? thx!

https://www.ramtrucks.com/BodyBuild...t should,schematic of the recommended circuit.

 

[Wild one]

Hello, Has anyone installed a switch in the BTSI connector to stop the truck from being put into gear? This would allow a remote start but not allow vehicle being put into gear. Stellantis has a tech bulletin but states that it will not work on the trans in a ram 1500 3.6l. For anti theft purposes should the fob code be stolen and truck started, they would not be able to put it into gear. Thoughts? thx!

https://www.ramtrucks.com/BodyBuilder/service/Image?imageId=MtQrP/FqLY5r/est8MtGjGgHzAHGUTU0WB3rWuqSY7YmQ2vEhuBWBB50ujfcHjlM #:~:text=WIRE COLOR&text=The control circuit that should,schematic of the recommended circuit.

You can buy a plug-n-play switch that interrupts the ignition,or you can splice in a switch into the red wire to the ignition switch.
Search on here as i forget who's building the plug-n-play version,but they're a member on here

 

[RamDiver]

You can buy a plug-n-play switch that interrupts the ignition,or you can splice in a switch into the red wire to the ignition switch.
Search on here as i forget who's building the plug-n-play version,but they're a member on here

Jeff @JW2 Innovations created the No-Splice Kill Switch Harness for push button start vehicles.

Welcome To JW² Innovations! - JW² Innovations

JW² Innovations specializes in custom harnesses for additional needs with your Car, SUV, and Truck. Initially this all started with needing a theft deterrent solution for a vehicle I purchased that tends to be stolen more than others. After a lot of searching and trial and error I came up with a...

www.jw2innovations.com

I don't recall if he has a solution for a traditional keyed ignition.

The supplied harness blends in to the OE wiring perfectly and the installation is fast and easy, depending on where you choose to install your switch.

I recently installed a Viper DS4 and a MyCar2, use a steering wheel club, and still use the kill switch.

And, I have a Neutral release strap cover to be picked up at my NY mailbox, made by another member. @Destroyer1320

Destroyer1320 | Premium Vehicle Protection Parts & Accessories

Explore high-quality neutral strap covers, VIN Covers, kill-switches, and GPS trackers for Dodge, Jeep, RAM, and more at Destroyer1320.com

www.destroyer1320.com

.