Door module

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Buck477

Junior Member
Joined
Jul 25, 2026
Posts
2
Reaction score
1
Location
NY
Ram Year
2011
Engine
5.7
I changed to drivers front door and switched door module with the original one from my truck and nothing works from drivers door except rear windows. Any ideas?
 

MarshRam

Senior Member
Joined
May 24, 2017
Posts
2,383
Reaction score
1,710
Location
Florida
Ram Year
2014 SLT 4x4, 2012 ST
Engine
Hemi 5.7
I have this issue occasionally in my 2014. I purchased a new one when it first went out (and I may not have needed to). The new one worked fine, but then from time to time it goes out, sometimes entirely or just the rear will work. Pull the module out, unplug the section that isn't working and plug it back in. See if that works. I have no idea why this happens occasionally as the plug is never loose and is always properly seated. But this fixes the issue for me every time for a couple months. However, I didn't replace an entire door, so it could be something downline in that door, inspect as well. A quick unplug and re-plug is worth a shot anyway.
 
OP
OP
B

Buck477

Junior Member
Joined
Jul 25, 2026
Posts
2
Reaction score
1
Location
NY
Ram Year
2011
Engine
5.7
Thanks I'll try that. I switched the original wire harness in the replacement door. Still nothing, I ran into the same problem before but don't remember what the fix was.
 

MarshRam

Senior Member
Joined
May 24, 2017
Posts
2,383
Reaction score
1,710
Location
Florida
Ram Year
2014 SLT 4x4, 2012 ST
Engine
Hemi 5.7
Well, if you figure it out again, document it here. Great place to archive solved issues that you may need to reference years later if you forgot and it's beneficial to the community. LOL. Good luck man!
 
Back
Top