DaKing
Senior Member
- Joined
- Oct 21, 2010
- Posts
- 206
- Reaction score
- 94
- Ram Year
- 2004
- Engine
- 6.4 HEMI
ever since I started using 2 Kicker CVX Dual VC Sub's in a Ported FoxBox with 1500Watts, My mirror shakes uncontrollably.
It has fallen off the mount, no matter how tight I put the set screw.
I have fixed that issue, by drilling a small hole in the steel pad on the glass, and using lock-tight.
In fact, lots of screws are vibrating loose, so I've gone through quite abit of lock-tight.
back to my main issue, When I'm bumping, my review mirror shacks violently. After a few sec's the mirror has aimed all the way down.
Is there an aniti-vibration kit on the market to control the shake? Maybe some kind of small shocks? Or maybe a different design of the ball joint on the mirror.
It just sucks, having to re align the mirror after a good bumping session.
It has fallen off the mount, no matter how tight I put the set screw.
I have fixed that issue, by drilling a small hole in the steel pad on the glass, and using lock-tight.
In fact, lots of screws are vibrating loose, so I've gone through quite abit of lock-tight.
back to my main issue, When I'm bumping, my review mirror shacks violently. After a few sec's the mirror has aimed all the way down.
Is there an aniti-vibration kit on the market to control the shake? Maybe some kind of small shocks? Or maybe a different design of the ball joint on the mirror.
It just sucks, having to re align the mirror after a good bumping session.