F.B.O. questions

[Adams2013]

I'm Trying To Get An Idea Of What exactly Is Full Bolt On

My Current Mods Are
Vararam CAI
Moes 87MM TB
180 CST TS
Magnaflow Muffler Stock Piping Muffler Only
Diablo T-1000 With HemiFever Tune

I'm Trying To Get To FBO But Not Sure What Else I'm Missing Besides
Headers.... My Next Mod Will Be Headers But To be Honest ARH Longtubes Are Just Not In The Budget So I'm Going To Go With The BBK Shortys

After The Headers Will I Be Considered FBO At That Point

And Also What 1/4 Time Should I See After All This
Before I Added The HemiFever I Ran A 14.7
Not Sure What I Run Now I'm Thinking A 14.5 Maybe a 14.4
Not Sure Ill Find Out Friday And Post A Thread Of What I Ran

I'm Also Thinking Of Doing A CutOut And Y-Pipe Am I Wasting Time And Money
??? Or Should I Skip That And Just Get 4:10 or 3:92s

 

[09SMOKINHEMI]

there was a good deal on a set of ARH LT's in the classifieds section. if you go with a new ARH set it includes a Y-pipe and all the mids, etc. it is a high cost but does give you roughly 30 hp.

i would also recommend the cut-out and gears.

there was a black CC on here that ran low 13's NA with these mods, in the Houston area I believe

 

[Adams2013]

Was it a full crew cab like mine ?

 

[Adams2013]

Was it a crew cab like mine ?

 

[emjohn4]

FBO means something a lot different than what you have listed in your post.



ETA: Third definition on urban dictionary.

Oh, and FBO.

 

[Hemi450hp]

Was it a crew cab like mine ?

The crew cab that went 13.8 was a local customer down here. He had a Vararam intake, Moe's 87mm throttle body, JBA shorty Headers, Hemifever Tune, 2800 stall converter, 4.10 gears, and 28" drag radials.

I think his truck was capable of much more, but he never got a chance to run it again before going back to stock.

 

[BlownGP]

The crew cab that went 13.8 was a local customer down here. He had a Vararam intake, Moe's 87mm throttle body, JBA shorty Headers, Hemifever Tune, 2800 stall converter, 4.10 gears, and 28" drag radials.

I think his truck was capable of much more, but he never got a chance to run it again before going back to stock.

Sounds like it should be with those mods. Dont these things run high 14s stock?

 

[Hemi450hp]

I have only seen 2 crew cab trucks run faster than 15.0 in stock form. The same night that Joe ran a 13.8, there were 3 other crew cab Hemi trucks that could not run faster than a 15.2.

We even had an R/T out there that night who's best run was a 15.1.

 

[BlownGP]

I have only seen 2 crew cab trucks run faster than 15.0 in stock form. The same night that Joe ran a 13.8, there were 3 other crew cab Hemi trucks that could not run faster than a 15.2.

We even had an R/T out there that night who's best run was a 15.1.

Yeah, I wasn't sure. Haven't done my research on 1/4 times in these trucks.

So with that said, what's a typical 1/4 for a 4th gen crew cab?

 

[Adams2013]

FBO means something a lot different than what you have listed in your post.



ETA: Third definition on urban dictionary.

Oh, and FBO.

What I mean when I put FBO is

Full Bolt On

what Am I Missing Besides Headers To Be Full Bolt On
(FBO)