Fender height on leveled 2500?

[jstacey8]

It's time to sell the half ton and get a work truck (2500 cummins) but coming out of a lifted half ton I'm still not ready to be too low to the ground. What's the fender heights on a leveled cummins? Has anyone heard anything good or bad about the tuff country 3 inch lift?

 

[bcbouy]

i think a levelled 2500/3500 truck is pretty close to a 1500 with a 4 or 5 inch lift.a 3 inch lift on a 2500? good luck putting/taking anything out of the box without climbing into the damn thing.i've got 17" tires and i can barely touch the floor of the box on mine.

 

[jstacey8]

I'm just doing tileing so I'll only be up in once in the morning and once in the after noon. My half ton with 37's and 3.55's can't really handle the weight and towing. I hope to have a trailer in a few years anyways but not ready to be all stock haha

 

[Reaper26]

i bought the tuff country 3in lift for mine yesterday, anybody that has it or know about it how is the ride and are the spacers going to cause any problems? i got the 3 in front 2in rear with the sx6000 shocks.

 

[jstacey8]

Let me know how it is cause that's what I'm looking at getting but only one inch in the back

 

[theaaronbush]

I have a 2012 2500 with the 6.7 and RC 3" coil and 1" rear block. I also have Bilstein 5100s at all 4 corners. Front fenders measure 41.5" and 42" in the rear with stock 32.5" tires. The RC coil actually rides very nice with the 5100s.

Sent from my Samsung Note 4

 

[Reaper26]

hopefully ill have mine at the first of the week and can have it put on, ill measure everything before and after and post it. its guna look funny with thos little tire but new wheels and some 35s will be on it soon.

 

[jstacey8]

Any update on the lift?