Finished a couple of things this weekend

[Voodoochi1d]

Started off with removing the vinyl tape from the doors...

Before

and After

I also went ahead and upgraded the power and ground cable to 0 Gauge from the battery to the alternator and the engine to the chassis ground.

here are a couple of pics

last I received my 2nd amp today. I now have both my RF P500-2, doe my MTX 10's and my RF_P 400-4 for my doors 6x9's

will be getting more done soon.

 

[swamp_life hemi 05]

I've never upgraded the grounds and power wires on a truck like this..... How exactly do you run it to the alternator and to the other locations? Like I said I've never done this before lol

Droid Incredible 2 on the move!

 

[bigbadram1500]

Nice! I like the vinyl removed.

 

[RubberFrog]

Where did you get the 0 grade cable?

 

[jbmobbs]

^^what he said^^

 

[BMRbrnSNRbrd]

A lot of audio shops will sell it by the foot...all you have to do is cut it to length and add the appropriate ends.

 

[Musclemckeester]

Cool mods, I've gone back and forth on removing the vinyl on mine. I think I like it both ways. Lol

 

[Voodoochi1d]

0 gauge cable, crimped with ring terminals
5 sections
6', 5', 4', 3', 1' all shipped to my house for $60.00 made a great connection with a guy at a shop in Tennessee.


Ben:
Extreme Car Audio - Morristown
1227 W.1st North St.
Morristown Tn 37814
423-289-5912

Cable was delivered in 2 days, and Ben included a couple of extra ring terminals.
Got to say, very impressed with this shop. Wish I was closer to them.

 

[quietpeen]

that really isn't a bad price either

 

[Voodoochi1d]

not at all, 19 feet for $60, thats a lil over $2 a foot

 

[LB3711]

sweeet

 

[swamp_life hemi 05]

Ok I watched a couple videos on the YouTube and I think I can tackle this! So I connect the battery positive to the fuse box, the alternator to the positive on the battery. Then negative on the battery to frame? If I miss something plz correct me lol I'm not goin to do this till next week some time.

Droid Incredible 2 on the move!

 

[Voodoochi1d]

What I did was:
positive from battery to fuse
fuse to alternator
negative from battery to chassis 1' - fender
negative from battery to chassis 4' - frame
negative from battery to engine

zip tie and use loom to protect and look a lil more like it belongs..lol

 

[discojables]

Hey where did you get that sub box? It looks like the subs dont touch the seats. Im worried about buying a box and haveing the sound muffled becasue the subs touch the seat. This set up looks great, if anyone knows where to buy one or can recommend a site let me know. thanks.

 

[swamp_life hemi 05]

When you say "fuse" you mean fuse box? Or an actual inline fuse?

Droid Incredible 2 on the move!

 

[Voodoochi1d]

sorry, fuse box..
these 0 gauge cables were just for power and ground upgrade between between battery and alternator. grounds were 2 x chassis and engine.
I will be installing my power cable for my amps in the next couple of weeks. that will be fused about 1.5 to 2 feet from battery.

 

[wermbang]

Looks good

 

[BigH0ss]

Nice mods

 

[swamp_life hemi 05]

sorry, fuse box..
these 0 gauge cables were just for power and ground upgrade between between battery and alternator. grounds were 2 x chassis and engine.
I will be installing my power cable for my amps in the next couple of weeks. that will be fused about 1.5 to 2 feet from battery.

Ok I got ya. I've already got a power wire ran so ill just copy war you've done. Really clean job BTW! Look good

Droid Incredible 2 on the move!