Fitment Questions: 295/60R20 w/ Zone Arms?

[SuperTrooper]

Is anyone running 295/60R20 offroad tires (specifically Nitto Trail Grapplers) on a truck with 2.5" leveling kit and Zone UCAs? My stock 275/60 tires seem pretty close to the ball joint knuckle on the Zone arms, so I'm curious if I'm going to need to run spacers or not?

Thanks, Chris.

 

[RyanJM]

I would imagine they fit. I had 305/55's on my stock 20's on my 09 with a spacer level. The side bitters rubbed the sway bar a little at full lock but still had a little room at the UCA. Do you have 20x8 or 20x9's. I have seen that size on a silver 20x8 and it cleared better than my 305/55's on my 20x9 chrome clads.

 

[SuperTrooper]

I have the alloy 20x8s. The thing is, the zone arms are a lot beefier than the factory UCAs, and I'm curious if the larger ball joint knuckle is going to be too close with a larger tire.

 

[Caldwell]

With a 20x8 going to a 295 wide tire your gonna atleast need wheel spacers (I'm pretty sure ). Yes I am guessing lol

 

[scottyram]

I'm running 305/55/20s with the Zone level and UCAs, no rubbing full lock in either direction, and no where close to rubbing the upper arm.

 

[DisturbedGator]

from my research on the interwebz I have notcied that people with the 20x8 stockers have less fitment problems with 295s than the 20x9s. Im hoping to get some Nitto Terras in that size on my stockers for a while.