Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I added LED strips since I didn't have footwell lights,
I put one in front of the center jump seat on the floor
and the other I put under the back seat. I tapped into
to the dome light circuit, on the drivers side of the
dash. they go on and off with the dome light, my wife
even likes them.
yes, I pulled up the sill plates front and back and ran the wires under
them and then under the carpet and taped the wire to the
underside of the back seat. the LED strips I bought at
Walmart for 8 bucks for both