Guys with roll pans

[ST-8]

This was my first mod on my first truck back when I was 17, when I bought this truck I told myself I wasn't gonna put a roll pan on it. "Was gonna use it as a truck an blah blah" well of coarse that was a lie to myself an I went from a stock truck to this lol, but hey it's been almost 5 yrs of owning it so not bad in my book. So if you got a roll pan would you post a pic, I been searching some an would like to see what you all have.

 

[TheSatinPumpkin]

Some of my old clunker. S1S Rollpan. Bolt on for 2 years then welded in.

 

[ST-8]

You sold it??

 

[TheSatinPumpkin]

Yes last month due to medical reasons. Its a bummer but she went to a good home as she has been neglected and sitting in the garage for the last few years.
New owner is nearby and is someone i have known a few years through ram forums and GTG's. He has already made some nice add on's since and is active in Mopar / Truck GTG's.

Last pic of her being trailed by the new owner.

Still have my Jeep and Charger so still part of the Mopar family.

 

[Hemi450hp]

Sir Michaels pan welded on...

 

[Hemi450hp]

Here is a pic before the paint...

 

[RAtmosphere]

Street Scene bolted in, easier to fix/replace if I drag it off

 

[ST-8]

I think I'm gonna just have it bolted in an let it be. Had problems on my last truck with it cracking so don't wanna deal with that

 

[98hemi-ram]

If you can afford to get a steel pan and have it welded in id go that route. Looks much cleaner! If its welded in you should have no problems with cracking since it will be welded solid!

Im guessing your last truck probably had a fiberglass or urethane rollpan molded in which will always be prone to cracking! If you get something other than a steel pan id say just bolt it up and go.

 

[98hemi-ram]

Best before pic I have on hand right now.



And now after with the welded in pan!

 

[Redtruck-VA]

Weld that sucker in.....

 

[WulfGang]

good bye bumper

hello roll pan

 

[mrfyram1500]

Don't have one but really like the look

 

[05daytona]

Here's mine.

 

[ST-8]

LOL I know it looks 10 times better with no seems. Maybe down the road Ill have it welded in I like that rollpan Greg looks like the one on satin's truck. What's s1s is that's the company?

 

[ST-8]

Here's mine.

I just can't get into not having my plate not on the roll pan, it's too clean for me I guess lol. My buddy has a Sonoma with a sbc an has the roll pan with no plate like that an I just can't get into it. I like how you got you plate tho

 

[05daytona]

I just can't get into not having my plate not on the roll pan, it's too clean for me I guess lol. My buddy has a Sonoma with a sbc an has the roll pan with no plate like that an I just can't get into it. I like how you got you plate tho

Thanks. The whole reason I did it was because nobody else has, that I've seen anyway. I did the exhaust for the same reason.

 

[Demon-HeMi]

You may stare at my ass if you like LOL!


I welded mine at every possible location, I used to say Id never have a roll pan either, but look at me now lol

 

[TheSatinPumpkin]

S1S = Slammed 1 Suspensions. He was a vendor many moons ago where i also got my 4/6 McG' Kit. The rollpan is prob' not his own design but i don't recall the brand of the rollpan.