HarrisFD
Junior Member
- Joined
- Apr 18, 2018
- Posts
- 23
- Reaction score
- 9
- Location
- Far North Idaho
- Ram Year
- 2015
- Engine
- Ram 2500 4x4, Cummins 6.7, 68RFE
I’ve been doing a major gut and redo of my rams interior. One of the upgrades I’m currently in the middle of is a heated wheel upgrade. I’ve hit a roadblock in that I don’t know where to connect the two pins from the conversion harness into the back of the I-311 connector above the drivers footwell . I asked the harness vendor with no response. Any insight to the correct pin locations would be most appreciated .