Heavy duty CV axle

[JohnCA]

Might want to look into this https://rickroodstransmission.com/product/repair-kit-722n695bka/

 

[Raminit2014]

Great info fellas thank you, definitely gonna do the never seize maintenance, appreciate the tips

 

[MrFigs]

I too vouch for the Cardone HDs... One Mopar failed, I put a top of the line Napa in, next year the other mopar failed, put another Napa in. one year later both Napas failed, put the cardones in no problems in I want to say in like 8 years.

Not HD, but RockAuto does list some extended travel offroad cv's.

 

[simers]

Did you replace the stub shafts, before switching to the Cardone shafts…I blew a factory shaft, installed one from Carquest and it lasted approximately 140 klms, no damage, I just snapped it back in to weigh my options…
Thanks Simers

 

[Raminit2014]

Once again thank you to everyone who has chimed in your time is much appreciated, it’s been very helpful, I’ve got: Mevotech ttx tie rod ends, lower ball joints, wheel hub assembly.
Cardone hd cv axles.
Transtech stub/intermediate axle kit w sureseal boots
Core4x4 ucas

What type of antisieze are y’all using on the cv axle splines?
Can I use the same antisieze on the slip yoke?

 

[MrFigs]

no anti-seize here
Mevotech says don't use anything on the hub side. whereas Google AI says use a molybdenum disulfide anti-seize.
Cardone's site so far makes no mention of it.