I installed hid lights from ddm tuning . lights work only on high beam . ddm tuning said I need a capacitor but they said to put it between negative and switch wire . I don't know which is switch wire . not sure if that's what I need ? any help would be appreciated . thanks
hid lights in 2007 ram 1500
- Thread starter bluefin
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
0212353
Vendor
- Joined
- Jun 29, 2010
- Posts
- 26,460
- Reaction score
- 2,029
- Location
- Florissant, MO
- Ram Year
- 2019 1500 Laramie Sport Crew, 2019 1500 Big Horn Sport Crew & 2016 Charger SRT Hellcat
- Engine
- 2x 5.7L & 6.2L
DDM strikes again with their ****** product.
Welcome to the forum!
First off, I assume they are a BiXenon kit right? If so, best bet is to not fuss with their crappy "harness" or splicing wires into your factory wiring to get these working. A vehicle specific wiring harness can be found here - HID relay wiring harness - Retro-Solutions Store
Make sure you do the following:
1 - Select the 06-08 H13 BiXenon in the application drop down.
2 - Use coupon code "JJ" when you check out for 10% off!
Welcome to the forum!
First off, I assume they are a BiXenon kit right? If so, best bet is to not fuss with their crappy "harness" or splicing wires into your factory wiring to get these working. A vehicle specific wiring harness can be found here - HID relay wiring harness - Retro-Solutions Store
Make sure you do the following:
1 - Select the 06-08 H13 BiXenon in the application drop down.
2 - Use coupon code "JJ" when you check out for 10% off!
