Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I'd assume you can, I have been looking into this aswell. From what I have gathered you have to get the module, harness for bumper, sensors, and sensor surrounds. I have not verified that the harness connector is in the rear of the truck yet or the connector for the module though.
Sent from my iPhone using Tapatalk Pro
I'm guesstimating cost of about $500 to test this theory and see if it will work or not. But i'm not pulling the trigger till I verify the plugs are on my truck.
Sent from my iPhone using Tapatalk Pro
We're currently developing a OEM fit kit that will be in the range of 450-500 not including the rear bumper.
Just a note.......when I looked up the parts.....the sensors are $80 per (need 4) and the bezels are $15 per (again, need 4). Almost $400 in just sensors there....
you can actually get really nice aftermarket kits that lets you adjust the distances. all it is really is sensors and control module. two wire hook-up and mounting and running the wires for the sensors.
After market doesnt fully itnergrate with EVIC, I personally am looking for full intergration.
Me also. OEM only!
Do you known if the harness for the module is included by default at the passenger side ine the headliner?
Have not got that far, need to look under the rear bumper to for the other harness.
Sent from my iPhone using Tapatalk Pro
where is located near the rear bumper?
Rear drivers side from the looks of it