Hallowfear
Junior Member
I have the same colour red on my 2019 but I got the black out package, the handles don't bother me
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
where'd you order them from?
I have the same dislike for any non-body color handles. ie. the chrome ones on my longhorn drive my ocd squirrely (along with the chrome mirrors).... and bumpers lol. meh, maybe it's not so much ocd as preferring the look of a sport where everything matches
Same here, had two sports before my longhorn and much prefer the color matched look. My longhorn has the limited grill which I also think would look much better color matched.
Same here, had two sports before my longhorn and much prefer the color matched look. My longhorn has the limited grill which I also think would look much better color matched.
this my brother....this is the best looking grill I’ve seen on a 4th gen (bbiously my opinion)
but you always hear people say you can’t paint chrome etc.
However this grill was made I dunno...but I’d love one. Slammed isn’t my thing but the front end is perfection right here
View attachment 192499
I didn't get them here, but you can find them at this link. The price seems the same as what I paid.where'd you order them from?
I have the same dislike for any non-body color handles. ie. the chrome ones on my longhorn drive my ocd squirrely (along with the chrome mirrors).... and bumpers lol. meh, maybe it's not so much ocd as preferring the look of a sport where everything matches
At least it’s just a regular cab...
I’ve had colormatched handles sitting in a box for well over 2 years lmao one of these days when the weathers right and I have time between jobs I’ll tackle it..
Sent from my iPhone using Tapatalk Pro
You'd have to take the door panels off, but you could undo some of the bolts on the upper corner of the inner door skin and reach in there to get to the 3 bolts that hold the handle on. Every time I try a short cut, it ends up being a bigger pain in the ass so I just took the whole inner door skin off. It's not that hard to do really.how did you do them without taking the door panel off
how did you do them without taking the door panel off
I take it you didn’t have to remove the glass window? Have been contemplating taking mine off to paint them.I went through the access hole in the door but you have to have skinny arms and patience to go that route because it can be a little frustrating. I believe the access hole is a little higher on the regular cabs then on the other cab sizes which makes it easier on the reg cabs. I didn't need to loosen any of the bolts on the panel either.
I looked where the bolts were on the new handle and went at them with a little 1/4 drive ratchet. Once the bolts were loose I put some painters tape around the handle on the outside to protect it. From there I pulled the handle and detached the rod connecting it. Before connecting the new handle I partially screwed in the bolts into each of the handles bolt holes and removed them. They aren't threaded from factory and are nearly impossible to get started when going this route. I started the bolts by hand then tightened with the wrench. Other than that it is just reversing the steps till its all back together.
Took me probably 45 mins MAYBE an hour tops to do both sides in total.
I take it you didn’t have to remove the glass window? Have been contemplating taking mine off to paint them.
I take it you didn’t have to remove the glass window? Have been contemplating taking mine off to paint them.