Ignition Switched Power Location Under Hood - For Relay

[EViS]

I require a switched ignition hot wire for a number of accessories (via a relay signal) on a 2015 RAM 1500. It seems that most people use the centre console power outlet as their switched ignition source. However, I need a switched wire under the hood in the engine bay.

Could I have some recommendations for where you guys get an ignition signal wire under the hood?

 

[BossHogg]

Check your owner's manual, in the fuse section, for the fuse number that controls the interior power plug. The fuse has two positions: always hot and ignition-switched. Use a fuse tap to get your relay control signal.

 

[EViS]

Check your owner's manual, in the fuse section, for the fuse number that controls the interior power plug. The fuse has two positions: always hot and ignition-switched. Use a fuse tap to get your relay control signal.

I did consider this. However, I have already moved the interior power outlet fuse to always hot as this is more useful for me. Hence, I cannot now use it with an ignition-switched fuse tap (or can I?).

 

[04fxdwgi]

Choose your selection and test with a test light. Then use a "fuse tap" on the one that works for you. Too easy

 

[crash68]

Fuse F66 should be switched with ignition