EI-Ram
Junior Member
Morning all,
Brand new here, so if there's already a thread addressing my problem please let me know.
I have an 07 1500 with the 5.7 and its throwing the P0344 code, Camshaft Position Sensor "A" Circuit Intermittent Bank 1 or Single Sensor. I replaced the camshaft sensor with an aftermarket sensor and its still acting up. I've done a 'wiggle test' to check the wires and everything seems solid.
After changing the sensor I tried erasing the code but it came back immediately. Limp mode is intermittent and the conditions somewhat varies when it activates, so I never know when it's going to happen. Sometimes it'll activate if I go over 60mph, sometimes it won't. Sometimes cruise control will work under 60mph, sometimes it won't work at all.
Do I need a genuine Mopar sensor? Could there be something else causing the code? Any help y'all can give would be greatly appreciated, I'd like to get my baby back on the road.
Brand new here, so if there's already a thread addressing my problem please let me know.
I have an 07 1500 with the 5.7 and its throwing the P0344 code, Camshaft Position Sensor "A" Circuit Intermittent Bank 1 or Single Sensor. I replaced the camshaft sensor with an aftermarket sensor and its still acting up. I've done a 'wiggle test' to check the wires and everything seems solid.
After changing the sensor I tried erasing the code but it came back immediately. Limp mode is intermittent and the conditions somewhat varies when it activates, so I never know when it's going to happen. Sometimes it'll activate if I go over 60mph, sometimes it won't. Sometimes cruise control will work under 60mph, sometimes it won't work at all.
Do I need a genuine Mopar sensor? Could there be something else causing the code? Any help y'all can give would be greatly appreciated, I'd like to get my baby back on the road.
