ddetta88
Member
Well, I got them all installed, according to the instructions, wire ran, ground attached. Pulled the C1 plug put the wire in the right pin, took it to the dealer and had them activate the sales code and they dont work.
So I start double checking my work.. all wires connected properly, then I start looking at the harness under the dash, there was nit a wire in pin 5 in the C1 harness so I didn’t have to splice it.
I pull the c1 connector from the Power Distribution Center or whatever it’s called and look up in there and there is no pin in the female side of the PDC in the #5 spot.
So now I paid the dealer 100$ to activate a code that’s useless to me and I need to find a way to splice it into the cargo light.
Does anyone have a diagram of the PDC center under the dash I’d prefer to splice into it there since my wire is already run to that point. If not is there a place under the hood? Perhaps at the fuse panel?
Any help is appreciated, I searched high and low for diagrams but wasn’t successful
So I start double checking my work.. all wires connected properly, then I start looking at the harness under the dash, there was nit a wire in pin 5 in the C1 harness so I didn’t have to splice it.
I pull the c1 connector from the Power Distribution Center or whatever it’s called and look up in there and there is no pin in the female side of the PDC in the #5 spot.
So now I paid the dealer 100$ to activate a code that’s useless to me and I need to find a way to splice it into the cargo light.
Does anyone have a diagram of the PDC center under the dash I’d prefer to splice into it there since my wire is already run to that point. If not is there a place under the hood? Perhaps at the fuse panel?
Any help is appreciated, I searched high and low for diagrams but wasn’t successful
