bassslayer25
Senior Member
- Joined
- Feb 7, 2014
- Posts
- 2,052
- Reaction score
- 774
- Location
- East, Kansas
- Ram Year
- 2000
- Engine
- 5.9 360 V8
So, I bought a kenwood stereo about a week ago and im having some issues. Ive hooked up two stereos in the past so its not like its anything new but none the less im having problems. I hooked it up in my truck and turned it on and it worked fine. I setup all my audio settings, canceled the demo mode and all the stuff you have to do when getting hooking up the stereo for the first time. However, when i turn the truck off and then turn it back on it goes back to demo mode and reset all my settings. So everytime I turn the truck on I have to shut the demo mode off and all my audio settings are gone. Ive tried everything as far as wiring is concerned. I had the red to red and yellow to yellow and the stereo doesnt even turn on. The only way it works is if I combine both reds and both yellows with each other. Is this the stereo or something in the truck causing it to do this? I need some help! Its not a big issue but its really annoying. Thanks!