Leather replacement for jump seat

[Brads41789]

I have a 2015 CC express that has the jump seat without the storage underneath. I recently picked up a set of tan laramie seats but it did not include a jump seat. Does anyone know where I could order a set of covers for just the jump seat (or have a lead on a tan jump seat assembly). Every site I see only sells the covers as a complete set but I do not need the whole set as the seats are in great shape. Any help would be appreciated, thanks all

 

[Ricks Ram]

I have a 2015 CC express that has the jump seat without the storage underneath. I recently picked up a set of tan laramie seats but it did not include a jump seat. Does anyone know where I could order a set of covers for just the jump seat (or have a lead on a tan jump seat assembly). Every site I see only sells the covers as a complete set but I do not need the whole set as the seats are in great shape. Any help would be appreciated, thanks all

Did you check leatherseats.com?

Sent from my SM-G981U1 using Tapatalk

 

[Brads41789]

Did you check leatherseats.com?

Sent from my SM-G981U1 using Tapatalk

That was one of the first places I checked as I remember you recommending them in the past. They are only offering full sets or raw materials.

 

[BWL]

The seat shop sells individual covers and cushions, but don't show the centre console one. Might be worth sending them an e-mail inquiry though. Leatherseats.com may be worth an e-mail as well. The front seat bottoms and cushions are easy to find as the most common to need replacement. Other option is to try Benny at moparpartsgiant as the oe ones are usually available as individual covers. If they are he'll know or find out. Console swap threads are also a good place to look on the site as it's not an uncommon mod and leaves an un needed jump seat if there's nobody to trade with.

 

[Ricks Ram]

That was one of the first places I checked as I remember you recommending them in the past. They are only offering full sets or raw materials.

That's too bad. I did order a full interior so that would explain why I was able to order the leather jump seat cover. It fit perfectly. You may want to contact Benny as stated but it's actually (Allmoparparts.com) not partsgiant and see if he can order you a cover. Make sure he knows if you have a two piece or three piece jump seat.

Sent from my SM-G981U1 using Tapatalk

 

[Brads41789]

The seat shop sells individual covers and cushions, but don't show the centre console one. Might be worth sending them an e-mail inquiry though. Leatherseats.com may be worth an e-mail as well. The front seat bottoms and cushions are easy to find as the most common to need replacement. Other option is to try Benny at moparpartsgiant as the oe ones are usually available as individual covers. If they are he'll know or find out. Console swap threads are also a good place to look on the site as it's not an uncommon mod and leaves an un needed jump seat if there's nobody to trade with.

That's too bad. I did order a full interior so that would explain why I was able to order the leather jump seat cover. It fit perfectly. You may want to contact Benny as stated but it's actually (Allmoparparts.com) not partsgiant and see if he can order you a cover. Make sure he knows if you have a two piece or three piece jump seat.

Sent from my SM-G981U1 using Tapatalk

Benny was actually on the list of considerations as I have ordered through them a few times now. I'll reach out to a few of the leather companies and get quotes first but I'm pretty sure AMP is probably going to be the end product due to factory matching colors.
Ty guys

 

[BWL]

Benny was actually on the list of considerations as I have ordered through them a few times now. I'll reach out to a few of the leather companies and get quotes first but I'm pretty sure AMP is probably going to be the end product due to factory matching colors.
Ty guys

The 2 seat cover places we mentioned do sell oe replacement so the match should be decent. Be aware that even the oe will not match exact right away. When I replaced my seat bottom with the mopar oe one it looked quite a bit different, but after a few months of wear it matched perfect. The dyes do fade and wear a bit from heat, uv and cleaning.

 

[bruce219]

I got mine from Leatherseats.com.I emailed him after watching a video of him on youtube covering a jump seat.Told him all I needed was jump seat to match factory laramie seats.
Told me it may not be an exact match,I said no problem.Bought it and it's perfect,guy was a gentleman to deal with.It's a PITA to cover that seat though,I have same one with lower storage.Have to take it apart.Took me over 2 hrs.

 

[Brads41789]

The 2 seat cover places we mentioned do sell oe replacement so the match should be decent. Be aware that even the oe will not match exact right away. When I replaced my seat bottom with the mopar oe one it looked quite a bit different, but after a few months of wear it matched perfect. The dyes do fade and wear a bit from heat, uv and cleaning.

Makes sense and also good to know the other companies offer factory match.
I just priced the covers and it's about 250 for the factory parts on AMP. About what I expected to be honest.

 

[Brads41789]

I got mine from Leatherseats.com.I emailed him after watching a video of him on youtube covering a jump seat.Told him all I needed was jump seat to match factory laramie seats.
Told me it may not be an exact match,I said no problem.Bought it and it's perfect,guy was a gentleman to deal with.It's a PITA to cover that seat though,I have same one with lower storage.Have to take it apart.Took me over 2 hrs.

Thank you! Do you happen to remember the price? Also ty for the heads up on the time lol
I have to disassemble the top for the new 2018 style USB hub tray anyway so it shouldn't be too bad. Big fan of 2 birds 1 stone

 

[bruce219]

I forget,maybe around $200.There is a good video on youtube to watch on it,guy makes it look a little easier than what it is.You have to take the factory cloth off.

 

[Brads41789]

I forget,maybe around $200.There is a good video on youtube to watch on it,guy makes it look a little easier than what it is.You have to take the factory cloth off.

Ty for the ballpark price, it's a step in the right direction. I believe it though, they do that stuff all day so they're probably pretty good at it lol

 

[Ricks Ram]

Thank you! Do you happen to remember the price? Also ty for the heads up on the time lol
I have to disassemble the top for the new 2018 style USB hub tray anyway so it shouldn't be too bad. Big fan of 2 birds 1 stone

The Jump Seat isn't to bad to take apart once you figure it out. The cover from Leatherseats.com fits perfectly and I'm sure the factory one will as well. Mine is a three piece so it is a little more involved. Just take your time and enjoy the experience.

Sent from my SM-G981U1 using Tapatalk

 

[Brads41789]

The Jump Seat isn't to bad to take apart once you figure it out. The cover from Leatherseats.com fits perfectly and I'm sure the factory one will as well. Mine is a three piece so it is a little more involved. Just take your time and enjoy the experience.

Sent from my SM-G981U1 using Tapatalk

Thanks for the advice Rick. I'll update this when I find out what option I end up going with. Hopefully it'll help someone else in the same situation eventually lol

 

[Brads41789]

So to update this post... I messaged Leatherseats and they replied and told me they now only do custom jobs for the minimum of 1 row so they would not make a jump seat only cover for me.

Last weekend I found a tan leather jump seat in a truck 45 miles away and I picked it up for $300. Unfortunately it needs some SERIOUS cleaning. I guess the scrap yard I picked it up from takes all the windows off the vehicles before they hit the lot. So the fabric on the cup holder portion has some mold/mildew (not too bad to clean) and the other parts of the cover have some rust coloring on them. I took the entire jump seat apart and I'm going to be cleaning it sometime this upcoming week. I'm not sure how long it was sitting out there but when I picked it up the lower portion was a solid ice block lol. It took a few days to thaw it out before I could even assess the damage. All in all I think i'm going to be happy with it when it is all cleaned up as the leather was still in A+ shape.