mikz86ta
Member
- Joined
- Oct 4, 2014
- Posts
- 77
- Reaction score
- 6
- Location
- Tallahassee, Florida
- Ram Year
- 2014
- Engine
- Hemi 5.7
Im going thru my 'want' mod list and one of those is LED some of the bulbs outside the truck. Already done 90% inside. I did the tag light 194s since they were cheap n easy. Got the tag light out message. Been wanting to do the front turn signal bulbs.
I like the look of them not reflecting the amber color when they are off. Plus like the LED look of them on.
Searched around and not seen a definitive answer with 2013 / 2014 models.
If get the 3157 plug n play LED in amber.........
Do I need ones for CanBus? Will that alone keep any problems/messages/hyperflash from happeneing?
Do I still need load resistors either way?
If so what watt load resistors?
Is there an alternative to load resistors like a diffent flasher relay?
Thx, Michel
PS : on the tag lap leds......should I do a simple 100ohm resistor or try to get canbus 194s?
I like the look of them not reflecting the amber color when they are off. Plus like the LED look of them on.
Searched around and not seen a definitive answer with 2013 / 2014 models.
If get the 3157 plug n play LED in amber.........
Do I need ones for CanBus? Will that alone keep any problems/messages/hyperflash from happeneing?
Do I still need load resistors either way?
If so what watt load resistors?
Is there an alternative to load resistors like a diffent flasher relay?
Thx, Michel
PS : on the tag lap leds......should I do a simple 100ohm resistor or try to get canbus 194s?