Leveling Kits

[ag1001]

So I'm still new to all this truck stuff and just got my new Ram about 2 weeks ago. I'm finding things out little by little about lifting by browsing through the forum. I still have a lot to learn though before I lift mine. So a few questions.

My truck is a 2015 EcoDiesel 1500. I want to level it first before lifting it, so what is the highest level kit I can get without the front of the truck being higher then the rear. I want them leveled obviously, hence the reason I want a level kit. But I don't want to get a 1 inch kit and the front still be sitting lower then the rear. And I don't want to get a 2 inch and the nose will be sitting too far up.

And second, if I say were to get a 2 inch level kit, would I be able to add a 4 inch lift kit after that? And would it be sitting 6 inches higher then I originally had it before adding anything. Since I got a 2 inch level and 4 inch lift?

I hope I didn't lose anyone there, and would appreciate any/all the help I can get. Thanks for helping a newbie!

 

[14BlackRAM]

I think people were setting their front level to 2.1" on the Bilstiens.

 

[gassersarentdead]

Measure your truck. Chances are your rear is near 3" higher than your front. If you plan on lifting don't use a spacer, go with bilsteins, Ranchos, or pro comp struts.

 

[Thatdude596]

My has kit was .75 rear 2.5 front...looked cool destroyed front end.

 

[ag1001]

Measure your truck. Chances are your rear is near 3" higher than your front. If you plan on lifting don't use a spacer, go with bilsteins, Ranchos, or pro comp struts.

trust me I want to, but they don't make any for my truck at the moment