license plate bulb covers

[allenw88]

Maybe a bizarre question, the covers to my license plate bulbs are horrible yellow. Is there a way to clean them? If so how and how do I get them out. Or would it be best to order new. Where and what would I look for to order new ones? Thanks

 

[KGBIGCOUNTRY]

JC Whitney might have them, if not I doubt the dealer will want tooo much for them.

 

[MoparMulisha]

These what you're looking for?
02 08 Dodge PU RAM 1500 03 09 RAM 2500 3500 Rear Step Bumper License Light Set | eBay

 

[LS5DodgeRam]

i have the same problem and it is killing me!

 

[Jaybone]

Just a suggestion. I had the same problem so.... i poped out my old ones,and the lens..bought small piece of plxi-glass and made a template..cut it out with a hack saw,smoothed the edges and used black silicone to hold the glass back to the housing..total cost was 4.50$ and about 1 hour. now its clear and always clean.

 

[Ramunit]

I like the plexiglass idea, I think the stock lenses are quite yellow to begin with.

 

[sullivan]

Just a suggestion. I had the same problem so.... i poped out my old ones,and the lens..bought small piece of plxi-glass and made a template..cut it out with a hack saw,smoothed the edges and used black silicone to hold the glass back to the housing..total cost was 4.50$ and about 1 hour. now its clear and always clean.

I may have to do this, not that mine are yellow but the stock ones prevent a lot of light from coming through and I think it would look cleaner over all with clear lens.

 

[bloombloom88]

I may have to do this, not that mine are yellow but the stock ones prevent a lot of light from coming through and I think it would look cleaner over all with clear lens.

I'm thinking the same thing. I installed led bulbs in mine not too long ago, and noticed the lenses look like they restrict some light. Don't get me wrong I have PLENTY of light for my plate, these bulbs are stupid bright.. It would just give me something to do