Lift and Tire Size on this?

[MoparFin]

Anyone want to take a guess at the lift and tire size on this truck? I want my QC to sit like this.

 

[BOWERSFJ]

Probably just a 2.1” Bilstein in the front ... Nothin in the rear


Sent from my iPhone using Tapatalk

 

[markwoodlief]

Probably just a 2.1” Bilstein in the front ... Nothin in the rear


Sent from my iPhone using Tapatalk

this is likely the correct answer.

 

[quietpeen]

I'm going to say 2.8 in the front....spacer in the rear and 35" tires?

 

[BOWERSFJ]

I'm going to say 2.8 in the front....spacer in the rear and 35" tires?

That’s a lot of sidewall on those 20” wheels ... You might be right ... I was just lookin at the gap between tire and fender ... Forgot to look at the tire itself


Sent from my iPhone using Tapatalk

 

[BigRed4x4]

Sit's like mine with bilstien shocks set at 2.1 and nothing in the rear along with 35" tires.

 

[MoparFin]

Sit's like mine with bilstien shocks set at 2.1 and nothing in the rear along with 35" tires.

What’s the measurement to the door opening to get in?

 

[BigRed4x4]

What’s the measurement to the door opening to get in?

20 3/4” to the bottom of my front door.


Sent from my iPhone using Tapatalk

 

[MoparFin]

Wonder if the black one has 33s? Fender gap seems a little bigger on it?

 

[BigRed4x4]

Wonder if the black one has 33s? Fender gap seems a little bigger on it?

After a closer comparison you might be right.

 

[Moparfanatic21]

I would say that black truck has a leveling kit with 33" tires.

 

[quietpeen]

There is no way those tires are 33’s

 

[BOWERSFJ]

There is no way those tires are 33’s

I just zoomed and did the measurements ... If those are 20” wheels, then those are 33” tires ... Numbers don’t lie


Sent from my iPhone using Tapatalk

 

[Moparfanatic21]

I just zoomed and did the measurements ... If those are 20” wheels, then those are 33” tires ... Numbers don’t lie


Sent from my iPhone using Tapatalk

I agree weren't big enough to be 35s

 

[MoparFin]

So if they are 33s, in theory my truck with a level should look the about the same.

I am considering 2.5" front/2" back Motofab kit, then when I get tires, possibly 275/65r20s for the stock rims

 

[mtnrider]

I just imported the picture in to Autocad (yes I'm bored) and did some dimensioning based on a couple known values (lenghth of the door handles, diameter of the gas tank door etc).

Wheels are 20", and tires measure about 34" which means they are likely 35's. Tires are always smaller then what the height claims to be. My brand new 35's measure just over 34" in real life.

Can't help you on the lift since I have a HD truck but you guys would probably know what it takes to get 35's on a 1500.

.
..

 

[MoparFin]

I found the owner! Posted this here: https://www.ram1500diesel.com/forum...10421-anyone-run-275-65r20-tires-2-print.html


I'm running 275/65/20 Goodyear Duratracs on stock sport rims with a 2 inch level in the front

 

[mtnrider]

So a 34.1" tire. I was pretty close Lol. The narrower tires (275-285) seem to be truer in height then the wider tires (315-325's)

.

 

[Moparfanatic21]

I just imported the picture in to Autocad (yes I'm bored) and did some dimensioning based on a couple known values (lenghth of the door handles, diameter of the gas tank door etc).

Wheels are 20", and tires measure about 34" which means they are likely 35's. Tires are always smaller then what the height claims to be. My brand new 35's measure just over 34" in real life.

Can't help you on the lift since I have a HD truck but you guys would probably know what it takes to get 35's on a 1500.

.
..

That is commitment right there lol

 

[mtnrider]

That is commitment right there lol

Lol, I was just bored and on a mission to figure it out!

.