Lifted 4th Gen Pics - Show Em Off!

[Chief_6.7]

6 rough county and kicker braces. And after the alignment got done the truck rides really nice . The rims are ballistic rage 20x12 -44 and the tires are 37x12.5 nitto ridge grapplers .

Dam..... nothing else only 6 inch to clear the 37s. Do they fully clear even at full lock? What are kicker braces? (Sorry newb) do you run a coil spacer or a complete new cool for the rear? Sorry for all the newb questions it's just I love the way a -44 offset looks especially with 37s

 

[Heucobob]

It's a coil spacer and I had to trim a little plastic on the bottom front and some of the pinch weld . And no rub at all . The kicker braces just add stability to the front . U don't really need them unless u are going off road alot . I don't go off road much I just like the extra stability and looks

 

[Chief_6.7]

It's a coil spacer and I had to trim a littler plastic on the bottom from and some of the pinch weld . And no rub at all . The kicker braces just add stability to the front . U don't really need them unless u are going off road a lot . I don't go off road much I just ills the extra stability and looks

One other question which gears do you have on your truck? I'm worried about getting 37s but I have 3.21s on mine

 

[BOWERSFJ]

Forget about 37's with 3.21's ... I have 35's with 3.55's, and every day I wish I had 3.92's


Sent from my iPhone using Tapatalk

 

[Heucobob]

I have plenty of power for the 37s maybe yours is just old technology the 8 speed is geared real low so it has plenty of power . Don't let people steer u away it looks great and still has lots of passing power .

 

[BOWERSFJ]

Yes, I do have the 6-spd ... I suppose the 8-spd would help


Sent from my iPhone using Tapatalk

 

[Chief_6.7]

I have plenty of power for the 37s maybe yours is just old technology the 8 speed is geared real low so it has plenty of power . Don't let people steer u away it looks great and still has lots of passing power .

This is great to hear as this was holding me back as well.

 

[dan0]

Adjustable bills on front, Bills on the rear ( 1" longer) , Daystar 1" poly spacers on the rear. 35 x 12.5 buckshots mudder II. bakflip bed cover, switchblade light bar under tailgate. debadged.

 

[RobbHimself]

Full wash and detail took me a solid day but so worth it! 2013 Sport 5.7 Crew on Nitto's with a bil 5100 level at 2.1".
Picked up painted bushwacker's and plated flaps for the rig roads too. Sprayed bed, Truxedo, Ram Boxes, sunroof, sport hood, 9" display, leather, loaded

 

[joeygster]

Full wash and detail took me a solid day but so worth it! 2013 Sport 5.7 Crew on Nitto's with a bil 5100 level at 2.1".
Picked up painted bushwacker's and plated flaps for the rig roads too. Sprayed bed, Truxedo, Ram Boxes, sunroof, sport hood, 9" display, leather, loaded

Very nice....but I'm biased.

 

[SJP_1809]

Adjustable bills on front, Bills on the rear ( 1" longer) , Daystar 1" poly spacers on the rear. 35 x 12.5 buckshots mudder II. bakflip bed cover, switchblade light bar under tailgate. debadged.

How do you like those Buckshot's? Are they wearing good and how's the noise on the highway?

 

[RobbHimself]

Very nice....but I'm biased.

Haha I can see that. Looks great man! Those Rockstars with the side steps are a clean match in terms of the sharp angles and matte black.



I'm probably going to have to chill on this setup for a while since coming back from out west. But there's still so much stuff I want to add to the truck.

 

[joeygster]

Haha I can see that. Looks great man! Those Rockstars with the side steps are a clean match in terms of the sharp angles and matte black.



I'm probably going to have to chill on this setup for a while since coming back from out west. But there's still so much stuff I want to add to the truck.

Thanks man....ya the spending on these trucks can really get outta hand if you're not careful.

 

[jk6672]

https://youtu.be/Gd7t-9LJSt0

 

[Grtrnd1]

2013 Rough Country lift. Bushwacker flares. 35-12.50-20s. First time Dodge owner.

 

[Dart]

38x15.5R20 with a 6inch RC lift

 

[dhambyst121]

One other question which gears do you have on your truck? I'm worried about getting 37s but I have 3.21s on mine

I would never run 37s with anything less than 3.92s.

Sent from my LG-LS997 using Tapatalk

 

[VegasDragger45]

38x15.5R20 with a 6inch RC lift

Gorgeous truck, that in Vegas?

 

[Thinkclear_988]

Sent from my iPhone using Tapatalk

 

[Dart]

Thank you! Its in San Diego