NorthernSense
Junior Member
I have had this 2016 Ram 1500 for a few years but had not got around to making the changes I wanted until recently. I put the bilstein leveling kit (set at 2.8 front) and a 1 inch block in the rear., also added a set of 285/65/r20 BFG KO2's to help fill the void. I just ordered a set of Bushwacker fender flares to protect the paint and planning to install this weekend. Although this is my introduction I have already read through posts getting a lot of help on the bilstein install (especially torque specs). So happy to be here and thank you for the help!
