More toque?

[Gashaw40]

I wondering what things I could do for more torque. I have 99 ram with 360 , I already have shorty headers , free flowing exhaust ,cai ,and superchips flashpaq. I plan on going to 3.90 gears later, just looking for any other ideas also heard about modding the intake and tb.
Thanks

 

[WhiteExpress]

You already mentioned the first thing that came to mind, being gears.

I don't know if you have a 4x or 2x Ram. Depending on tire size, I would recommend at least 4.56s. While it doesn't 'increase torque' it sure uses what you have WAY better.

You can modify the keg (shorten the runners) but that's more a top end HP mod, with potential losses to your low end.

You might also look into a torque converter / shift kit. My old man's '98 5.9 Ram with both seems to have quite a bit of 'snap' off the line. He got a torque converter designed for towing (what he uses the truck for) works pretty awesome.

 

[Gashaw40]

It's a 4x4 right now just 31s, I thought about 4.10s but someone told me you had to have a bigger chunk for that not sure though, I also heard about cutting out the divider in the tb and intake to make an oval

 

[Okiespaniel]

Exponential increases in low end torque are never cheap. That would include gears, torque converters, nitrous, superchargers, etc.

One of the cheaper mods would be to chenge to a SCT tuner from your superchips. The superchips by design only helps the most in the top end. It "piggybacks" the stock tune.

The SCT replaces your factory program with a complete tune that eliminates torque limiting and increases bottom end torque. It is not a cure all but helps more than manifold mods.

Manifold mods help but only in increments. I'd buy 1.7 rockers 1st.

 

[Gashaw40]

Alright thanks iv been thinking about selling the superchips and getting sct anyway.