Motofab 2 inch front spacer ISSUES

Discussion in 'Lifted' started by brianmx234, Jul 13, 2019 at 2:37 AM.

  1. brianmx234

    brianmx234 Junior Member

    Age:
    31
    Posts:
    1
    Likes Received:
    1
    Joined:
    Saturday
    Location:
    Maryland
    Ram Year:
    2019
    Engine:
    5.7
    What’s up everybody I have a 2019 ram 1500 classic Big Horn quad cab. I attempted to put these spacers ontop of my struts and the bottom of the strut tube would contact my lower control arm not letting me put the bolt through, I set the hat 180 out and attempted to reinstall and had same issue so it wouldn’t go either way. Haven’t come across many issues online so I don’t really know why mine is a problem. I ordered the Bilstein 5100s because I had them on my previous 2016 with no issues at all installing, so hope to not run into issue with those. Anyone had this issue? FYI my kit they sent says it’s for 06 or 09-2018 ram.
     
    Dnell likes this.
  2. Dnell

    Dnell Junior Member

    Age:
    53
    Posts:
    1
    Likes Received:
    0
    Joined:
    Jul 5, 2018
    Location:
    Cleveland oh
    Ram Year:
    2014
    Engine:
    5.7
    Yeah I recently ran into this issue, And after struggling forever I found it was much easier to get bolt through as I lowered my jack allowing me to align one side of shock then tapping through although other side wasn’t quite aligned but worked..
     

Share This Page