derekd7987
Junior Member
Hey guys...pretty new here. I need some help. I have a 2008 QC Ram lowered 2/4 on 24 inch rims. I'm not exactly happy with the way it sits. I'd like it to be a tad bit lower, especially in the front. The idea is to either cut the 2 inch drop springs to try and make it sit 1/2 inch or maybe close to 1 inch lower in the front or buy these 3 inch front drop springs (link below). For the back I would just drop it to the 4.5 inch setting. Has anybody done this or used these 3 inch springs? Just doesn't seem like my truck sits right. The lowering kit has been on for about 4.5 years and 50,000 miles. Any advice or opinions would be greatly appreciated. I'll attach some pics of the way it sits. Also I'll attach some pics of the way it used to look and the way it looks now after the makeover I just gave it. Thanks in advance
252130-8 MaxTrac 3 Inch Front Lowering Coil Springs V8 for 02-08 Dodge Ram at Andy's Auto Sport
Pic 1 - stock 20s 2/4 drop with rear in 4.5 inch setting
Pic 2 - 24s with 305/35/24 with rear in 4 inch setting
Pic 3 - 24s with 305/35/24 with rear in 4 inch setting
Pics 4 and 5 - updated pics of the makeover
252130-8 MaxTrac 3 Inch Front Lowering Coil Springs V8 for 02-08 Dodge Ram at Andy's Auto Sport
Pic 1 - stock 20s 2/4 drop with rear in 4.5 inch setting
Pic 2 - 24s with 305/35/24 with rear in 4 inch setting
Pic 3 - 24s with 305/35/24 with rear in 4 inch setting
Pics 4 and 5 - updated pics of the makeover