Need Help Finding Transmission Relearning Option on AlfaOBD for 66RFE - 2015 Ram 2500 2WD

[Megas_XLT]

Hey everyone, I'm trying to perform the transmission quick learn on my 2015 Ram 2500 2WD with the 66RFE transmission using AlfaOBD, but I can't seem to find the option. I’ve watched a few YouTube videos that show it, but when I go through the app, I don’t see it. Maybe I’m looking in the wrong place or missing a step? Any guidance or suggestions would be really appreciated!

 

[ricky_bobby]

Mine lists on my 2018 in Alfa as "RFE Quicklearn"

What module are you looking through?

 

[Megas_XLT]

Mine lists on my 2018 in Alfa as "RFE Quicklearn"

What module are you looking through?

I went for the transmission one I think I went to the body control too but I didn't see it I'll be sure to take a quick look again when I get back

 

[Megas_XLT]

Mine lists on my 2018 in Alfa as "RFE Quicklearn"

What module are you looking through?

 

[ricky_bobby]

Those look like modules for Aisin? Not sure on the gas trucks if thats the right module? I have a heavy duty so mines the 68RFE

If I recall correct, it should be in the engine module not the transmission- because that is where I also find the run lift pump procedure when I change fuel filters

 

[24gearhead]

Hello everyone
Need help. I installed a Sonnax valve body on my 2018 Doge Ram 2500 6.4 liter engine that has a 66rfe transmission . I decided to also install a new selenoid pack . Once I was done I took my truck to the local transmission shop so they can perform the relearning on the trans. Later they informed that they are unable to do the relearning on the trans due to “ the trucks computer “not letting them reset code P0871. The owner of the shop tried as well and failed also. He informed me that their a possibility that my computer might need replacement. I’m frustrated and don’t know what to do at this point. Can anyone tell what steps should I take . My truck is still shifting hard . Thanks

 

[RamDiver]

Hello everyone
Need help. I installed a Sonnax valve body on my 2018 Doge Ram 2500 6.4 liter engine that has a 66rfe transmission . I decided to also install a new selenoid pack . Once I was done I took my truck to the local transmission shop so they can perform the relearning on the trans. Later they informed that they are unable to do the relearning on the trans due to “ the trucks computer “not letting them reset code P0871. The owner of the shop tried as well and failed also. He informed me that their a possibility that my computer might need replacement. I’m frustrated and don’t know what to do at this point. Can anyone tell what steps should I take . My truck is still shifting hard . Thanks

Start by browsing these threads obtained by searching P0871 with the site search utility in the upper right corner.

https://www.ramforum.com/search/3263107/?q=P0871&c%5Btitle_only%5D=1&o=relevance

.