Sarg0406
Junior Member
I recently acquired a 95 Ram 2500 8.0 4x4. I have done some research and have found that many parts are no longer available for the V10 so I have purchased what looked like the most difficult parts to find, the cam and crank sensors. The truck runs well but I will need to rebuild the front end soon as it’s very loose. It has the Dana 60. In my early life I spent several years as a dealership tech so I know my way around a vehicle and toolbox. I think I have everything covered, the only question I have is will I need the hub puller from OTC or can I loosen the hub bolts and pound on them from behind the knuckle to get the hub bearing out? Any help would be appreciated. Thank you in advance.