I m not getting oil pressure when i turn my truck on from a cold start or when its been off for a couple hours. When this happens i just turn it off then turn it back on and the pressure is fine what could be causing this.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The sensor port is within a couple inches of the pump and should see pressure almost immediately.
I lost oil pressure not long ago and pulled the sensor to see if I had any real pressure and didn't have any. I replaced the oil pump and thoroughly inspected the pickup tube. Installed a o ring and a small mechanical gauge at the sensor port. Fired up and all is good, getting 65psi.
I would first check the sensor.
It's located on the left front of the engine on the passenger side. Look at the picture I posted. The gauge is Tee'd to the sensor.
Should have worded that better i meant were to purchase it a link to the item sorry about the mix up and thanks for all the help.