POST YOUR AUDIO PROJECT OR PROJECTS IN THE WORKS!!!!

[AngryRams]

During build... Was there anyway to avoid those angles in the cubby? What if you cut the carpet?

Dayton HO 10s. I ordered one while doing the mockup of everything and, of course, they are out of stock until mid September. So I'm in no hurry to finish this up this week.

Sent from my SM-N950U using Tapatalk

 

[Spud2388]

During build... Was there anyway to avoid those angles in the cubby? What if you cut the carpet?

Sent from my SM-N950U using Tapatalk

I’m sure you can but you will run into the issue of the magnet not fitting, or the basket. And I was trying to us as much room as possible to keep me from having to go any taller.

 

[AngryRams]

I’m sure you can but you will run into the issue of the magnet not fitting, or the basket. And I was trying to us as much room as possible to keep me from having to go any taller.

Yeah those angles are gonna really limit options also

Sent from my SM-N950U using Tapatalk

 

[Spud2388]

Figured I would post some more pictures of my build. I did this a few months ago. I’ve done both the front doors, the rear wall, and under the rear seats and rear floorboards. Still need to do the rear doors and under the front seats and floor boards. It’s the 80mm noico off amazon, closed cell foam, and dense rubber. Forgot what all the technical terms for this stuff are but it sure has made a difference so far.

 

[mondo]

Figured I would post some more pictures of my build. I did this a few months ago. I’ve done both the front doors, the rear wall, and under the rear seats and rear floorboards. Still need to do the rear doors and under the front seats and floor boards. View attachment 137142View attachment 137144 View attachment 137145View attachment 137146 View attachment 137147It’s the 80mm noico off amazon, closed cell foam, and dense rubber. Forgot what all the technical terms for this stuff are but it sure has made a difference so far.

Nice! I have some of the same stuff that i need to use once i go to install my components and paint match door handles. Wonder how it compares to the mainstream names?