project day

[nationalminer84]

nothing major but added a flowmaster and gauge kit. I was going to do the flowmaster myself but a guy just opened up a new shop in town and said he'd do it for $20 so give him business and not have to lay in the dirt win win..... the rear pipes were tough to get out too so I would have been pissed off and taken me a long time on the ground...

Us speedo cluster.... been staring at the same style gauges since I had my 15. Figured I'd change them out Didn't come with instructions. this pissed me off I paid $150. you need to know how to set the needle motors for the vehicle so you don't break the needles and or the motors I have installed these before so I tried myself just guessing. I broke one needle but was able to glue it together. you have to turn them counter clockwise then off they pull right off. then once your face is installed plug it into the truck to set the gauges. press the needles back on until they click and you're good. sorry the light up pics suck.

 

[unxpctd]

Gauges look great! Definitely stands out...congrats on the tough install!

 

[Hydrasport]

Most gauges will rest at zero when the key is on. Except the gas gauge. That was no fun when you forget to mark the "ignition on/engine off" locations of the gauges.
How did you get the gas gauge back into the correct location?

 

[nationalminer84]

Most gauges will rest at zero when the key is on. Except the gas gauge. That was no fun when you forget to mark the "ignition on/engine off" locations of the gauges.
How did you get the gas gauge back into the correct location?

Photos and marked the position. realistically got lucky.