Rear Shock Questions

[Cruizer]

So I put the TGC 1.75" rear coil spacers on and I think it was a little much. My ass feels a little loose stomping on the skinny pedal. So will Bilstein rear shocks help with this? I read they help up to an additional 1" of lift. Not sure if that's additional to the 1.5" your supposed to be able to go with on the stock shocks or what though.

So what am I looking at here guys? I'm not even sure which Bilsteins go on the rear. Anyone have a part number? Will these stiffen up the rear suspension a bit with 1.75" rear coil spacers installed? Thanks for the input.

 

[012RAMbo]

I believe they are talking about 1'' over stock ride height. But the OEM replacement length Bilsteins for the rear are also backordered nationwide like the front adjustables are. I had to get the Bilsteins that when extended, were right at 30" for my 4.5'' rear lift. So that would put you somewhere around the 28" range. Not sure what the stock shocks measure. Email performance lifts and let them know what you have and they will get you the right shocks. I just did a quick search, not sure if it the exact shock you would need, but it should be the right length.

Bilstein 5100 Series Shock Absorber # 33-104652

 

[sausec17]

Bilstein Ram 1500 5100 Series Rear Shock # 24-187374

Here ya go bro!