RusslRam
Senior Member
- Joined
- Jan 21, 2017
- Posts
- 564
- Reaction score
- 498
- Ram Year
- 2013
- Engine
- Hemi 5.7
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I use the airbrush or "air eraser" if u looking it up. It uses compound to etch. Like a sandblaster just on a really small scale. My wife has a plotter so I can make my own stencils out of vinyl.Like the etching. How do you do that?
They are a lot easier. Especially with a 3" projector and full shroud. The big problem is that it's opened up a can of worms as far as ideas to retrofit. Already thinking of my next set. Think I might try a turbine shroud with switchbacks and a passive demon eye on my next build.Duals are lightyears easier than quads arent they!
Really like the turbine. The chasing halo is a nice touch.my last set were turbines with chasing RGB
Really like the turbine. The chasing halo is a nice touch.
Sent from my Pixel using Tapatalk
That's why I've been staying away from RGB. Always look good but all the Bluetooth controllers seem to not always work as they should. The IR ones work fine but have to be within the IR reader.They could do much more colors and combinations of course. The halos I used we’re cheap too, the controller was picky
That's why I've been staying away from RGB. Always look good but all the Bluetooth controllers seem to not always work as they should. The IR ones work fine but have to be within the IR reader.
Sent from my Pixel using Tapatalk