VolsRam
Senior Member
So I got home from work excited to install my new S&B in my '13 Ram 5.7 HEMI. I got started around 5:45 and it took me 2 HOURS!! Here's a couple reasons: I have a crappy cheap tool set so the ratchet set does not crank back after tightening or loosening, the A/C line was in the way AND all the way forward so I had to bend it (which it was still in the way), this have me trouble bolting the air box to the frame from inside the box, and it got dark by the time I got the fender liner back in place so I had to hold a flashlight between my shoulder and neck for everything else. Made me frustrated, but after starting it up and giving a little rev I am pleased with the sound. Looking forward to flying down the road and see what it does. To end this I'd like to find out how long it took y'all to install the S&B. If you could also add your mechanical ability and if youve install a CAI before. I'm just curious if I'm the only one that had that much trouble.
Edit: I didn't get a picture done after install since it was dark, so I took one today. I'm very happy with how the shifting pouts seem to come a little sooner and smoother. And the acceleration from rolling speeds is awesome!
Edit: I didn't get a picture done after install since it was dark, so I took one today. I'm very happy with how the shifting pouts seem to come a little sooner and smoother. And the acceleration from rolling speeds is awesome!
Last edited: