WilliamS
Senior Member
Built for plug and play on Quads, will work with Duals with a relay for the high beam switch (duals will need quad headlight stock harness).
Just finished these in time to trade in the truck. They are built off repo duals so I could fit the giant D2S bixenon projector and rgb halo. They have Morimoto 5k bulbs, power house 35 watt to 55 watt on high beam ballasts. All the hardware needed to run the halos through your phone on bluetooth with a free app. As well comes with not pictures 2 waterproof strips that connect to the halos that can be used as accent lighting that also chase and color change. I used morimoto sealer on both, then went around that with clear silicone to seal them the very best I could. One headlight has a small rub mark that will buff out.
Comes the canbus resistors, wiring for high beam for ballast connection and hi/low shutter for projector as well. The caps are setup for all the wiring.
Only things needed will be the harness from your stock quad headlights. Once you remove the stock headlights the harness between the truck and the headlight will be used to power this setup. Is 100% plug and play.
Im thinking $500 shipped to the US, I wont ship out of the continental US, dont ask, isnt happening.
Just finished these in time to trade in the truck. They are built off repo duals so I could fit the giant D2S bixenon projector and rgb halo. They have Morimoto 5k bulbs, power house 35 watt to 55 watt on high beam ballasts. All the hardware needed to run the halos through your phone on bluetooth with a free app. As well comes with not pictures 2 waterproof strips that connect to the halos that can be used as accent lighting that also chase and color change. I used morimoto sealer on both, then went around that with clear silicone to seal them the very best I could. One headlight has a small rub mark that will buff out.
Comes the canbus resistors, wiring for high beam for ballast connection and hi/low shutter for projector as well. The caps are setup for all the wiring.
Only things needed will be the harness from your stock quad headlights. Once you remove the stock headlights the harness between the truck and the headlight will be used to power this setup. Is 100% plug and play.
Im thinking $500 shipped to the US, I wont ship out of the continental US, dont ask, isnt happening.
Last edited: