taillights/blinkers/third light not working

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

whiteram1500

Junior Member
Joined
Dec 10, 2013
Posts
18
Reaction score
7
Location
Tucson AZ
Ram Year
2012
Engine
5.7 hemi
Hi so i noticed this yesterday a coworker of mine told me that one of my taillights were bad when i was leaving the job site. Which isn't usually a problem just replace the bulb. but that isnt the cause this morning i had a friend help me and none of my lights are working in the back! If anyone has had this problem please get back to me and if its a fuse which one would it be?
 

6speedcummins

Member
Joined
May 6, 2015
Posts
76
Reaction score
49
Location
N. Dinwiddie, VA
Ram Year
2015
Engine
6.7 Cummins
I had a similar problem. I added the factory rear centre running lights under the tailgate like the duallies have. I used a T connector to tap them into the license plate lights. One day I noticed that not only was the new light completely out, but so were both of the license plate lights. Now all lights mentioned are using LED bulbs but had been working just fine. The only way to get my license plate lights to work again was to disconnect the added lights. There was no short and no other rear lights were affected. No fuses were blown, I'm still scratching my head.
 
Back
Top