TBCM wiring...

[vetteyog]

Looking for a clearer picture of this page from a wiring diagram, want to add a factory brake controller to my 2012 Ram 1500


When I zoom in on it , it becomes unreadable.

 

[jawzs2]

You might have all the wiring in place, I did on my 2010, and my son did on his 2012, check out this video

Dodge Ram Integrated Trailer Brake Controller Install 2009-2012

Demonstration how to install an OEM brake controller on your 4th gen Ram. Get your second 4-pin connector here - https://www.2040-parts.com/wiring-kit-instal...

www.youtube.com

 

[RamDiver]

Looking for a clearer picture of this page from a wiring diagram, want to add a factory brake controller to my 2012 Ram 1500

When I zoom in on it, it becomes unreadable.

Check the drawing on the PDF from Ian's post here. Although the clarity while zoomed in is marginal, it's much clearer than the drawing you posted.

.

 

[Fast69Mopar]

Here you go in PDF format...

 

[04fxdwgi]

Wiring / connectors should all be there under the dash already. Just need to fight getting the bracket mounted. Kinda plug in, program and play.

 

[GTyankee]

This mechanic makes several YouTube videos

2010-2012 Ram truck Integrated Trailer Brake Control (ITBC) module replacement

Please use the following link when ever using Amazon.com. Any purchases you make on Amazon will help support this channel.http://amzn.to/2mALgqSEveryone love...

www.youtube.com

 

[vetteyog]

Thanks for the replies... my truck I only has the 4 wire connector. It does not have the 3 wire connector (or at least I couldn't find it), that's the one I have to wire up myself.

 

[GTyankee]

IT is there, there are several YouTube videos that mention that they have trouble finding it.

They liked to Wrap that section of wiring in Electrical Tape
Look for the fattest section & carefully open that section up,
i think you will need to cut the tape

 

[04fxdwgi]

my 2nd connector had some grey foam over it, then taped to the harness. It is in there.

 

[vetteyog]

my 2nd connector had some grey foam over it, then taped to the harness. It is in there.

Could you give me some more information on where you found it?

 

[04fxdwgi]

under dash / behind the ignition stop switch / stop /start button area, taped to the wiring harness.