Tire size for 3” front and 2” rear lift

[Brandon Hyatt]

So I have a 2015 1500 and I was wondering what is the most aggressive tire size I could run on 20” rims without rubbing. I have stock wheels and tires right now and I just need something to make the truck look a little bigger and better.

 

[quietpeen]

35x12.5x20 or 295/65/20 would be your best bet

 

[BOWERSFJ]

295/60R20


Sent from my iPhone using Tapatalk

 

[Triumphx]

35x11.50 if you don’t want to run spacers on your stock wheels

 

[quietpeen]

35x11.50 if you don’t want to run spacers on your stock wheels

Yes if he has the 20x9 wheels but if he has the 20x8’s he would be fine

 

[6.7CumminsDrvr]

Check out manufacturer specs from their website. They provide the section width so you can see what size the tire will actually be. As a note, any tire that specs to 12.1” wide on a 20x9 factory rim will fit without spacers and without rubbing.

My 35 12.50’s spec out to 34.69” tall and 12.1” wide on a 20x9. On a 20x10 they spec out to 12.50”.........

 

[Tanae]

295/60R20


Sent from my iPhone using Tapatalk

Do you have a leveling kit on?

 

[BOWERSFJ]

Do you have a leveling kit on?

Did at one time ... Now have 4” lift with Bils ... When I had Bils at 2.1” I ran 285/60’s ... With you being 3” in the front, 295/60’s should be perfect


Sent from my iPhone using Tapatalk