Torq Specs for 2020 Classic 2WD front

[J054UA]

Just want to clarify the torq specs for the top nut and bottom two bolts for the front shock absorbers on 2020 Ram Classic 2WD V6 model?

I found this for specs but its not that clear for 2wd below

 

[J054UA]

Specifically the two bottom 13mm bolts on the front shock absorbers.

 

[J054UA]

Specifically the two bottom 13mm bolts on the front shock absorbers.

 

[Bigskyroadglide]

My guess, if you torque the 13 mm nuts to 100 ft lbs, you will more than likely be purchasing new bolts.

I think the torque spec is 19 ft lbs for 2wd lower bolts.

Torque Spec Settings of Dodge Ram 4

 

[J054UA]

I agree. I was gonna say hand tighten. But wasn’t sure. Also would it be good to use a little of blue locktite?

 

[Bigskyroadglide]

I don't think that is necessary, but it's not overkill