TPMS ISSUE ON NEW RIM PACKAGE

[SRT4Rich]

Can I put the stock TPMS sensors from my stock rim in to my new rims...bought 20×10 fuel vapor rims with 37×12.5 ridge grappler tires package the asked if I wanted to add the TPMS Sensors in the new rims and said yes didnt lnow it was a separate valve stem on the inside of rim went to mount them on the front of truck and snapped the sensor on my control arm

 

[1500ram12]

Yes


2018 Ram 2500 6.4L Hemi Tradesman

 

[SRT4Rich]

I want to delete the Inner valve and replace my outer valve with my stock sensors if possible

 

[1500ram12]

Can you take a pic of the inner valve on the wheel


2018 Ram 2500 6.4L Hemi Tradesman

 

[SRT4Rich]

This is what happened

 

[1500ram12]

Is there a valve stem on the outside of the wheel also?


2018 Ram 2500 6.4L Hemi Tradesman

 

[SRT4Rich]

Yes one inside and 1 outside

 

[SRT4Rich]

This is the inside valve

 

[1500ram12]

You'll have to use the stock tpms sensors on the outside and either find a really short valve stem to replace the inner or find something that will work as a plug for the inner


2018 Ram 2500 6.4L Hemi Tradesman

 

[SRT4Rich]

Thank you so much found these hopefully will work

 

[SRT4Rich]

Thanks for your time with helping me ...lol back looks good

 

[1500ram12]

I like them. Don't know other than actual offroad wheels if I've seen wheels with a inner valve stem


2018 Ram 2500 6.4L Hemi Tradesman

 

[indept]

Wheels & tires look great but wtf did they put a valve stem on the inside?

 

[SRT4Rich]

Come to find out some off road rims have a 2nd valve stem to pressure down and hook a gauge at the same time and to perge air out when filling nitrogen

 

[JohnnyMac]

Mine have two valve stems as well and was told for off road tires, it is mostly for mounting the sensors. They were unable to put the OEM sensors on the outside valve stem holes because of the geometry of the wheel and had to mount them on the inside. They are also used to add nitrogen in one and bleed "normal" air out of the other or to add air in one and monitor pressure from the other. They've been around for a number of years.

 

[1500ram12]

Come to find out some off road rims have a 2nd valve stem to pressure down and hook a gauge at the same time and to perge air out when filling nitrogen

Did you get this figured out?


2018 Ram 2500 6.4L Hemi Tradesman