Ughhhhh! Ball Joint Help Please!!!!

[iSlacker816]

So got my front end torn apart and apparently the bottom ball joints are off set and i ordered straight ball joints. I dunno if i should go ahead and put them in or reorder ones?!?

 

[Badger]

Reorder. They have to have that angle on them.

 

[The Assassin]

If you can...see about getting ones from Moog.

 

[iSlacker816]

It says its adjustable for 1 degree +/- for camber and caster adjustment but i don't know if i need adjustment

 

[iSlacker816]

And they are Moog, they just had 2 options and i chose the wrong ones apparently

 

[ramhunter9]

You got them threw Rock Auto .. they will make it right

 

[iSlacker816]

Well the straight ball joints are goin in and of my alignment ends up off I'll get new ones. We messed the ball joint up prior to realizing the ones in it were offset

 

[ramhunter9]

Are you doing a how to on this by chance ?

 

[iSlacker816]

Oh **** thanks for reminding me, we're doin the other side in the morning so I'll take pics!

 

[Rogan68]

I did the ball joints in my '01 about a month ago. It's 4WD, not sure if your is, or not..

My 2500 with D60 front axle was a TOTAL PITA!!!

 

[Mopar1973Man]

Mine were just as nasty as Rick's...

 

[iSlacker816]

Yea its 4x4 dana 44 or 40 which ever it is. Also a real PITA!!!! Here's the driver lower coming out by TORCH!

 

[wermbang]

ouch

 

[Badger]

No good. Do you have the press?