Wheel off set question and rubbing

[astarlund]

I have a 2010 ram 1500'4x4, i am looking at installing the moto metal 962 20x9 with a 0MM offset they are black and machined rims, thinking about wrapping them with nitto trail grapplers 35x12.5.
i currently have the bilsteins 5100 installed at the highest level.

Would i have any rubbing issues?
Does anyone have any pictures so I could expect to see if they stick out past the wheel wheel.

Any recommendations on other sizes?

Thanks guys



Sent from my iPhone using Tapatalk

 

[mel5151]

Did it rub?


Sent from my iPad using Tapatalk HD

 

[smarsmar101]

You "should" be safe with 0 offset... normally 1/4 spacers are required.

 

[Sladerade]

They will stick out past the wheel well I have a +1 they stick out a little bit. If you get the stock fender flares it will hide them


Wait a second... I'm posting from an iPhone?

 

[mel5151]

Sladerade, are you running 35" tires and did u use spacers with your +1 offset wheel?

 

[Sladerade]

You dont need spacers for 0 or +1 offset. it sticks out far enough from the upper control arm. Yes its 35.4" tall

 

[mel5151]

Awesome thanks. The 35.4, is that a 12.5 wide or more of a 11?


Sent from my iPad using Tapatalk HD

 

[Sladerade]

It's more of 11.5-11.7 wide the specs are on there website


Wait a second... I'm posting from an iPhone?