Jackfate
Senior Member
- Joined
- Feb 18, 2016
- Posts
- 111
- Reaction score
- 13
- Ram Year
- 2016 1500
- Engine
- Hemi 5.7
Works on 2016 outdoorsman both seats
Thanks
Thanks
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Worked on my push button start.How would one accomplish this with the push button start? There isn't a way to turn the truck on without starting it. Either accessory (pushing the button without engaging the brake) or starting it.
A repeat:
1. Sit in truck and close all the doors: do NOT start truck.
2. Buckle seatbelt.
3. Put truck in the RUN position: do NOT start truck. Turn keyfob to RUN or (keyless) do NOT press brake pedal; press start button twice.
4. Wait for seatbelt lamp to go out on DID or EVIC.
5. You now have 60 seconds to complete the next steps.
6. Within 10 seconds, unbuckle, then rebuckle, the seatbelt 3 times, ending with the seatbelt buckled. Watch the DID/EVIC and ensure the seatbelt lamp turns on/off each time you buckle/rebuckle the seatbelt.
7. Put the truck in the OFF position. Turn keyfob to OFF or (keyless) press the start button once. A single chime should sound indicating programming complete.
Notes:- The seatbelt chime will still sound 5 times when starting the truck. The seatbelt lamp will always be on. You will occasionally get messages saying seatbelt unbuckled on DID or EVIC.
I did it on my '11 a couple weeks ago after reading about it here. I'm really good about wearing my seatbelt and always have it on, but when I'm driving around on old dirt roads in the woods it bugs me. I always just fastened it behind me but now I don't even have to do that.I just did this to my 09' and it worked. Thank you for posting this that dam chime drove me nuts.