I got my truck one step closer to what it's supposed to be. I put audio controls on the steering wheel.
Kind of pissed me off, all the money I spent to "upgrade" the radio to the 5.0 (8.4 not available
), and bought the "popular equipment group", but no audio controls.
If tomorrow cooperates, I'll put the flowmaster exhaust on. Make it sound right.
I'm also trying to get remote start working on my truck (yet another feature not available
). On the 2017 trucks, they all have the RF Hub that supports remote start, unless you have a manual. The only thing that is missing is the hood switch and the two wires in the Front Module harness up to a connector under the PDC that goes to the BCM. I made a jumper to fake out the circuit to look like the hood latch is closed. I've confirmed that the hood shows as closed, and there are no circuit issues. I have Remote Start enabled in every module where I can find a reference, but it's still not working. I can see in the RF hub that the button is being pushed, but the BCM is not initiating a start for some reason. BCM shows it enabled, learned, and the temporary disable is off. The inhibit conditions are all neutral, and all the enable bits appear to be on, but the start command isn't coming through. There's apparently still a bit(s) that I've missed. When I find it, I'll put up a thread. So far there are no 2017 kits from Mopar, but when we finally do get one, there shouldn't be much in it, so it might be moot to put up a thread.