BEAST19
Senior Member
- Joined
- Mar 26, 2017
- Posts
- 1,067
- Reaction score
- 741
- Ram Year
- 2015
- Engine
- Hemi 5.7
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Spiffy!
Which brand are these? Led Concepts or Diode?
I think you called me at one point to review? If not......sounds very similar to another customer..... (I run RetroShop).
With what you have there, what was the trick on your 15? Did you keep the stock 3157 bulb in the turns, or change to a LED? The LED Concepts ones are a bit different than the Diode ones I carry - but always curious on these!
Yes I probably did call you! I called many people! I kept original 3157 bulb...
The issue wasn't the bulb tho. I was getting a hyper flashing without having a resistor installed . I had to install a resistor on the ground wire of the parking lamp/turnsignal harness . The resister had to be wired with both ends wired into the ground wire . Very simple fix that no one could tell me to do, not even led concepts. Just trial and error on my part.
Sent from my iPhone using Tapatalk
Only issue now is I must not have sealed them the best . Driving in nasty white out snow/slush storm for 200 miles the other day and got some fogging inside the lense. It's gone now but def gonna have to bake , clean out the butyl, and reseal sometime. Any recommendations on any anti fog stuff to put inside lense when I have them apart?
Sent from my iPhone using Tapatalk
how bad was the fogging? any pics?
Gotcha!
So......yeah, sealing - all depends on where wires are coming out, etc.....its a trip on headlights sometimes. But - keep an eye on it, if it was just the one time occurrence, not an issue.....
Good info on the resistor as well!