Hello all....
I recently purchased and installed Alpharex projectors with 6000K HID.
Of course...one of the ballasts were bad and had to wait forever to get a replacement
Got everything working but I noticed the drivers side has a weird pattern to the light...off to the side?
Also...I have a 2012 and also have AlphaOBD. I'm trying to get it to keep the DRL's on all the time...(in white) I can get it to work with the amber turn signal lights on. I have switchback assemblies so I want it to"switchback" which it will not if already amber.
I have set my Alpha up to have:
DRL location...Dedicated DRL...set (turn signal makes it amber)
DRL Config...Canada...tried Optional DRL and it makes the DRL amber
Any suggestions how to get the DRL to be on all the time unless turning?
I will say...love the brightness of the HID's...but it's a ***** to get all the cabling from the ballast to hide properly....and still get the plastic retainer clip to slide down easily...especially passenger side.
Thanks to all!
For the odd drivers side pattern, check to see if it's seated properly. If it is you'll have to play with the clocking of the bulb.
I'm assuming that you have the g2's.
For drl's (location) you are limited with your 2012.
Easiest way would be just to use the supplied drl harness.
Not so easy, If fog lights are a option for drl's on your 12, and you don't have fogs, you can tap into the truck's side harness that has the fog light wiring and use that as your drl feed.
Because the white part of the switchbacks under the parking light feed, there is no way to use the turns as drl's and have the white illuminated.
2018 2500 6.4L Hemi Tradesman
1990 5.9L 12v Cummins W250