SoCal Bomber
Senior Member
- Joined
- Apr 7, 2017
- Posts
- 103
- Reaction score
- 34
- Location
- Antelope Valley
- Ram Year
- 2016
- Engine
- 5.7 Hemi
Progressive on order, cant wait!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Switched out the competitor for the progressive. Its just the right rumble. I do have a considerable amount of drone at certain rpms. The MDS also sounds pretty bad when it kicks in.
Switched out the competitor for the progressive. Its just the right rumble. I do have a considerable amount of drone at certain rpms. The MDS also sounds pretty bad when it kicks in.
Nice! I know that the competitor is louder, but is there a huge change in drone? Was the competitor unbearable and caused you to switched?
Question for the guys installing these systems. Ordered the Progressive series kit and currently have a Flowmaster 50 series welded in. Will I be able to get this done without going to a muffler shop and pay for the labor?! Only have pretty basic tools at home
Sent from my iPhone using Tapatalk Pro
I think the CCs are hearing/having drone, my truck really has zero drone its pretty quiet at hwy speeds.
I do switch it to 8th gear to turn off the MDS because that sounds like crap when it kicks in.
Question for the guys installing these systems. Ordered the Progressive series kit and currently have a Flowmaster 50 series welded in. Will I be able to get this done without going to a muffler shop and pay for the labor?! Only have pretty basic tools at home
Sent from my iPhone using Tapatalk Pro
yeah, just make sure you cut roughly the length of the stock muffler (measure if you still have it laying around) so you won't have issues fitting the carven.
just out of curiosity, did anyone else have a different size nut on one of the outlet pipe clamps of the stock muffler? didn't make sense to me but whatever...
Quick question, do i cut the clamps on my stock exhaust tips and reuse for the 5 inch tips or does the kit come with them?
Quick question, do i cut the clamps on my stock exhaust tips and reuse for the 5 inch tips or does the kit come with them?