refeicul
Member
i just did my 3rd oil change this year on my 5.2L automatic. it was running a bit rough changed the plugs one at a time to make sure i didn't mix any wires up gapped to .40. idles fine so i didn't think anything of it i tried to run to the store and in drive ran like crap. 3 codes showed up p0300, p0305, p0307. I checked the plugs wires distributor and cap.. all look good tested the injectors with a multi meter they tested fine. Im going to try and swap with other the "good" ones on the rail to see if the code follows the injector.
Another possibility is the ignition ballast i was told but couldn't locate it on the wiring diagram any thoughts on that?
It just kills me that it was running fine the other day and now everythings poopie.
I know all this was talked about before i tried the search feature and i got alot of this and that or the threads died without resolution.
Another possibility is the ignition ballast i was told but couldn't locate it on the wiring diagram any thoughts on that?
It just kills me that it was running fine the other day and now everythings poopie.
I know all this was talked about before i tried the search feature and i got alot of this and that or the threads died without resolution.